The story
The main challenge was working inside a finished house with high ceilings, delicate furniture, expensive tile, Venetian plaster, glass tables, and other interior finishes. The solution required careful protection, scaffolding setup, wiring corrections, and ceiling box adjustments.
Before the electrical work started, the furniture had to be moved and protected so the work areas could be accessed safely. Ram Board paper was placed over the floors, and full scaffolding was assembled inside the house. Because the ceilings were approximately 16 to 20 feet high, the scaffolding had to be moved through different rooms, reset in each work area, and taken down as the chandelier work progressed.
Work completed
Protected furniture and finished surfaces, covered work areas with Ram Board, assembled and moved scaffolding, reinstalled existing chandeliers, installed new chandeliers, relocated ceiling boxes, corrected wiring where needed, and tested the completed chandelier installations.
Final result
The chandelier work was completed across the high-ceiling areas of the house. The ceiling boxes were adjusted, wiring issues were corrected, and the chandeliers were installed while protecting the finished interior surfaces.
